Details Of Ftp Command; Ftp Server Support Command - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Details of FTP command

This section describes the FTP commands on the FTP client side supported by the Ethernet-equipped module, and the
methods of using those commands.
• Note that depending on the client side FTP application, some of the FTP commands may not operate as
described in this manual. Refer to the manual for the FTP client, and check the functions, operation
methods, and so on.
• The section enclosed in square brackets [ ] in the specification format can be omitted.

■FTP server support command

Command name Description
binary Function
Specification format
bye Function
Specification format
Same function
close Function
Specification format
delete Function
Specification format
Example
Similar command
dir Function
Specification format
Example
Similar command
get Function
Specification format
Example 1
Example 2
Caution
ls Function
Specification format
Example
Similar command
mdelete Function
Specification format
Example
Similar command
Notifies the FTP server that the file will be transferred without conversion. The return code and kanji codes are
also not converted.
These settings are automatically applied to the Ethernet-equipped module.
binary (abbreviated: bin)
Closes the connection with the FTP and quits the FTP.
bye
quit
Closes the connection with the FTP server.
close
Deletes files stored in the CPU module.
delete "file path name"
When deleting files stored in the SD memory card
delete 2:\MAINSEQ1.PRG
mdelete
Displays the file name, date of creation and volume of files stored in the CPU module.
dir [drive name:\]
When displaying the detailed information of files stored in the data memory
dir 4:\
ls
Reads a file from the CPU module.
get "source file path name" [destination file path name]
When reading files stored in the SD memory card and store with same file name
get 2:\MAINSEQ1.PRG
When reading files stored in the SD memory card and store with different file name
get 2:\SEQ1BAK.PRG\SEQ\SEQ10LD.PRG
• If the destination file path name (FTP client side) is not specified, the file is stored in the FTP client side with
the same file name as the source file name (CPU module side).
• The transfer destination is in the currently connected directly when FTP is started and connected.
Displays the names of files stored in the CPU module.
ls [drive name:\]
When displaying the detailed information of files stored in the data memory
ls 4:\
dir
Deletes files stored in the CPU module.
When deleting multiple files, specify the file name and extension in the file path name with wild cards (*, ?).
mdelete "file path name" (abbreviated: mdel)
When deleting all files with "CSV" extension from files stored in SD memory card
mdelete 2:\*.CSV
delete
1 FUNCTIONS
1.9 File Transfer Function (FTP server)
1
125