Securing The Intercom - CyberData 011414 Operation Manual

A.6 Securing the Intercom
Use the four Security Torx screws to secure the Intercom. See
Note: To mount the intercom, use methods
Torx Key
Operations Guide
compliant with local electrical codes.
Torx Screws
Caution
Equipment Hazard: Do not use an electric or power screwdriver to fasten the face
plate and PCB assembly to the gang box. To prevent over-torque damage to the
gasket, do not apply more than 10 inch-pounds force. Over-torquing will cause the
GENERAL ALERT
gasket to tear, risk moisture intrusion, and effectively void the manufacturer's
warranty.
Figure A-7. Securing the Intercom
Faceplate &
PCB Assembly
931338B

Securing the Intercom

Figure A-7.
CyberData Corporation
95
Custom
Enclosure