Usb Port; Lan Interface - ProMinent DULCOMARIN 3 Compact Assembly And Operating Instructions Manual

7.2 USB port

7.3 LAN interface

Ensure IP66/IP67 degree of protection
When you don't need the USB port, seal it with the
screw cap. IP66/IP67 degree of protection is only
ensured when the screw cap is screwed on.
Functionality:
Importing firmware updates
n
Loading log book data (tabulator with separate CVS format)
n
Loading recorder book data (tabulator with separate CVS
n
format)
Loading and saving system configurations (depending on
n
system)
Technical data:
USB socket: Type A
n
Specification: USB 2.0
n
Supported types of formatting: FAT16, FAT32
n
The device's LAN interface is used to connect to a customer net‐
work for the purposes of control and data exchange. An IP67
sealed M12 plug connection with D coding is used for the connec‐
tion. To connect to RJ45 network sockets in the building, ProMi‐
nent ® connecting cables of various lengths can be used. CAT6
installation cables are recommended for connections in the
building. If installing the device in damp rooms or if aggressive aer‐
osols are present, the RJ45 sockets must be fitted in a protected
location. The use of patch cables for installing RJ45 sockets is not
permitted.
In-depth knowledge of electrical installations is needed for instal‐
ling the network cabling in the building.
Functionality:
Web server (password-protected).
n
– Remote control using a web browser (PC, tablet, smart‐
phone).
VNC (Virtual Network Computing) server (password-protected).
n
– Transferring screen content to a remote PC to control the
device.
FTP (File Transfer Protocol) server (password-protected).
n
– Access to the device's SD card from a remote PC for the
purpose of data transfer (reading and writing).
Technical data:
Speed of 10 and 100 Mbit (fast Ethernet)
n
IPv4 network protocol
n
D-coded M12 socket
n
DHCP client and server functionality for the automatic configu‐
n
ration of the network interface. Note: When the client is ena‐
bled, the device attempts to contact a DHCP server for a
period of up to 2 minutes before the start. The device only
starts once contact has been made.
Manual assignment of network parameters (IP address, subnet
n
mask, gateway).
Interfaces
69