Enabling Dnd During Conference; Conference Lock; Open Dtmf; Pin Code - Grandstream Networks GSGVC3202 User Manual

Enabling DND During Conference

When DND is enabled during conference, the new incoming calls will be blocked. On the conference screen,
use GVC3200/GVC3202 remote control to click on MORE button
The icon will be displayed on conference screen if the device is set to DND mode. To disable
DND, select DND mode again and press "OK" key to cancel it.
----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
After enabling DND mode during a conference, the DND mode will remain effective after the conference is
over. To disable DND, please press
----------------------------------------------------------------------------------------------------------------------------- ---------------

Conference Lock

Users could lock/unlock the scheduled conference. Once it is locked, the other incoming calls will not be
able to join the conference.
The locked scheduled conference will display

Open DTMF

Users can dial DTMF during a conference.
1. On GVC3200/GVC3202 remote control, press the red shortcut key, or click on MORE button
→select "Open DTMF" on the conference screen to bring up the DTMF input screen.
2. Press the digital keys on the remote control to input DTMF. Press

PIN Code

During the conference call, the conference host can set a PIN code to lock the call. Once the conference
call is locked, the caller who wants to join this conference by calling the conference host must enter the PIN
code.
Here is how to use PIN code to lock the conference call:
1. During the call, in the GVC3200/GVC3202 display LCD call screen bottom menu, select MORE→PIN
Code.
on GVC3200/GVC3202 remote control when there is no active call.
icon on the screen.
GVC3200/GVC3202 User Guide
Version 1.0.3.64
and select "DND".
to cancel the operation if needed.
P a g e | 76