LLDP and VLAN Settings
Access GVC3212 home screen, go to Settings ➔ Network ➔ Other Network Settings ➔ to configure
LLDP and VLAN settings on GVC3212.
Notes:
•
Press Right arrow navigation key to open the sidebar and press on save to save the current settings.
•
Press on Back key to cancel the configuration change.
•
Parameters
Descriptions
LLDP
LLDP
Enable or disable LLDP. The default setting is "Open".
This field defines the layer 3 QoS parameter for SIP packets. It is the value used for
Layer 3 SIP QoS
IP Precedence, Diff-Serv or MPLS. The default value is 26.
Layer 3 Audio
This field defines the layer 3 QoS parameter for audio packets. It is the value used for
QoS
IP Precedence, Diff-Serv or MPLS. The default value is 46.
Layer 3 Video
This field defines the layer 3 QoS parameter for video packets. It is the value used for
QoS
IP Precedence, Diff-Serv or MPLS. The default value is 34.
VLAN
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The default value is 0.
Second layer
Note: Please do not change the setting before understanding the VLAN's settings or
QoS 802.1q/VLAN
consulting with the network administrator. Otherwise, the device might not be able to
Tag
get the correct IP address.
Figure 32: LLDP/VLAN settings
Table 7: GVC3212 LLDP Configuration Parameters
GVC3212 User Guide
Version 1.0.0.9
P a g e
|
35