Terminating The Ftp Connection; Ftp Client Configuration Example - HP 3100 v2 Series Configuration Manual

Terminating the FTP connection

To terminate an FTP connection, perform one of the following tasks:
Task
Terminate the FTP connection without exiting FTP
client view.
Terminate the FTP connection and return to user
view.

FTP client configuration example

Network requirements
As shown in
device and the PC can reach each other. An account with the username abc and password abc is
already configured on the FTP server.
Log in to the FTP server from the FTP client, download the system software image file newest.bin
from the PC to the device, and upload the configuration file config.cfg from the device to the PC for
backup.
Figure 27 Network diagram
Configuration procedure
# Examine the storage medium of the device for insufficiency or impairment. If no sufficient free
space is available, use the delete/unreserved file-url command to delete unused files. (Details not
shown.)
# Log in to the server at 10.1.1.1 by using username abc and password abc.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1
Press CTRL+K to abort
Connected to 10.1.1.1
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
230 Logged in successfully
# Set the file transfer mode to binary.
[ftp] binary
200 Type set to I.
# Download the system software image file newest.bin from the PC to the device.
[ftp] get newest.bin
227 Entering Passive Mode (10,1,1,1,10,68).
Figure 27, the device acts as the FTP client and the PC acts as the FTP server. The
Command
• disconnect
close
•
bye
•
quit
•
69
Remarks
Use either command in FTP
client view.
Use either command in FTP
client view.