Terminating The Ftp Connection; Ftp Client Configuration Example - HP 5830 Series Configuration Manual

Task
Display the help information of
FTP-related commands on the FTP server.
Enable displaying detailed prompt
information received from the server.
Enable FTP related debugging when the
device acts as the FTP client.

Terminating the FTP connection

To terminate an FTP connection, perform one of the following tasks:
Task
Terminate the FTP connection without exiting FTP
client view.
Terminate the FTP connection and return to user
view.

FTP client configuration example

Network requirements
As shown in
PC acts as the FTP server. The IRF fabric and the PC can reach each other. An account with the username
abc and password abc is already configured on the FTP server.
Log in to the FTP server from the FTP client, download the file newest.bin from the FTP server to the FTP
client, and upload the configuration file config.cfg from the FTP client to the FTP server for backup.
Figure 27 Network diagram
Configuration procedure
# Examine the storage medium of the device for insufficiency or impairment. If no sufficient free space is
available, use the delete/unreserved file-url command to delete unused files. (Details not shown.)
# Log in to the server at 10.1.1.1 through FTP.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1 ...
Figure 27, the IRF fabric that comprises two member devices acts as the FTP client and the
Command
remotehelp [ protocol-command ]
verbose
debugging
Command
•
disconnect
•
close
•
bye
•
quit
68
Remarks
N/A
Enabled by default.
Disabled by default.
Remarks
Use either command in FTP
client view.
Use either command in FTP
client view.