Switching To Another User Account; Maintaining And Troubleshooting The Ftp Connection; Terminating The Ftp Connection; Ftp Client Configuration Example - HP 830 Series Configuration Manual

Task
Upload a file to the FTP server.
Download a file from the FTP
server.

Switching to another user account

After you log in to the FTP server with one user account, you can switch to another user account to obtain
a different privilege without reestablishing the FTP connection. You must correctly enter the new username
and password. A wrong username or password can cause the FTP connection to disconnect.
To switch to another user account:
Task
Change the username after FTP login.

Maintaining and troubleshooting the FTP connection

Task
Display the help information of
FTP-related commands on the FTP server.
Enable information display in a detailed
manner.
Enable FTP related debugging when the
device acts as the FTP client.

Terminating the FTP connection

To terminate your FTP connection, perform one of the following tasks:
Task
Terminate the FTP connection without exiting FTP
client view.
Terminate the FTP connection and return to user
view.

FTP client configuration example

The configuration example was created on the 10500/7500 20G unified wired-WLAN module and
might vary with device models.
When configuring the 10500/7500 20G unified wired-WLAN module, make sure the settings are
correct (including VLAN settings) on the internal Ethernet interface that connects the module to the switch.
Command
put localfile [ remotefile ]
get remotefile [ localfile ]
Command
remotehelp [ protocol-command ]
verbose
debugging
Command
•
disconnect
•
close
•
bye
•
quit
63
Remarks
N/A
N/A
Command
user username [ password ]
Remarks
N/A
By default, the function is
enabled.
By default, the function is
disabled.
Remarks
Use either command in FTP
client view.
Use either command in FTP
client view.