Download Print this page

HP 5830 Series Configuration Manual: Configuring Password Authentication For Telnet Login

Hide thumbs

Advertisement

Figure 12 Telnetting to the device without authentication

Configuring password authentication for Telnet login

Step
1.
Enter system view.
2.
Enable Telnet.
3.
Enter one or multiple VTY
user interface views.
4.
Enable password
authentication.
5.
Set a password.
6.
Configure the user privilege
level for login users.
7.
Configure common settings
for VTY user interfaces.
The next time you attempt to Telnet to the device, you must provide the configured login password, as
shown in
Figure
the message "All user interfaces are used, please try later!" appears.
Figure 13 Password authentication interface for Telnet login
Command
system-view
telnet server enable
user-interface vty first-number
[ last-number ]
authentication-mode password
set authentication password { cipher |
simple } password
user privilege level level
See
"Configuring common settings for
VTY user interfaces
13. If the maximum number of login users has been reached, your login attempt fails and
(optional)."
35
Remarks
N/A
By default, the Telnet service is
enabled.
N/A
By default, password
authentication is enabled for
VTY user interfaces.
By default, no password is set.
The default level is 0.
Optional.

Advertisement

   Also See for HP 5830 Series

Comments to this Manuals

Symbols: 0
Latest comments: