Feature Upgrade To An Incompatible Version - HP 10500 Series Configuration Manual

<Sysname> issu commit slot 0
Upgrade summary according to following table:
flash:/feature1-r2111.bin
Running Version
Release 2110
Slot
0
Upgrading software images to compatible versions. Continue? [Y/N]: y
# Verify that both MPUs are running the new image.
<Sysname> display install active
Active packages on slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin

Feature upgrade to an incompatible version

Upgrade requirement
As shown in
(standby MPU).
Upgrade the feature1 feature from R21 10 to R21 1 1. The two versions are ISSU-incompatible versions.
Figure 40 Network diagram
Upgrade procedure
# Download the upgrade image from the TFTP server.
<Sysname> tftp 2.2.2.2 get feature1-r2111.bin
% Total
100 256k
# Display active software images.
<Sysname> display install active
Active packages on slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
Active packages on slot 1:
Figure 40, the device has two MPUs: one in slot 0 (active MPU) and the other in slot 1
% Received % Xferd
100 256k 0
New Version
Release 2111
Upgrade Way
Service Upgrade
Average Speed
Dload Upload
0 764k 0 --:--:-- --:--:-- --:--:--
132
Time Time Time
Total Spent Left
Current
Speed
810k