Table of Contents
Advertisement
Safety instructions
2.7 Cleaning
2.7.1 Pressure washing
2.7.2 The outside of the machine
2.7.3 Cleaning the floor
2.8 Repairing and servicing the dishwasher
2.9 Recycling the machine
The water in the chemical wash tank is at a temperature of approx. 60 °C and con-
tains detergent. Be careful when emptying and cleaning the tanks. Use protective
gloves.
The machine must not be cleaned with a pressure washer, either inside or out.
In order to satisfy current requirements, electrical components of approved enclo-
sure classes are used. No enclosure classes are designed to withstand pressu-
rised water.
Pressure washers and hoses must not be used to wash the outside of the ma-
chine. Water can penetrate into the electrical cabinet and the control panel and
damage the equipment, which may affect the safety of the machine.
When the floor is washed, water can splash up under the machine and damage
the components. These have not been designed to withstand being washed with
water. Do not wash the floor within 1 metre of the dishwasher. Pressure washers
have special protective cases which can be fitted to prevent water splashing.
Problems with splashing can also occur when using ordinary hoses.
Disconnect the power supply before removing the front panels. Avoid touching
hot pipes and the booster heaters.
When the dishwasher has reached the end of its service life, it must be recycled
in accordance with current regulations. Contact professionals who specialise in
recycling.
WD-59CT & WD-66CT
5
Rev. 2.0 (20110124)
Advertisement
Table of Contents
