Changing The Washing Temperature And Washing Time - Wexiodisk WD-6 DUPLUS Installation And User Manual

Operating instructions

4.2.3 Changing the washing temperature and washing time

The factory setting for the washing temperature is 60°C. The operator can adjust
the temperature to between 55 and 70° C.
The chemical washing times for each programme are set on delivery to:
•
•
•
The washing times can be adjusted between 0.4 and 4.0 minutes.
Changing the values. Selecting service mode
The machine must be set to service mode when the operator needs to change a
value. This is done using the control panel. The values that can be changed flash.
The displays and buttons have different functions than when the machine is in
normal operating mode.
The panel's functions in service mode
1.
2.
3.
4.
5.
6.
7.
8.
9.
0.9 min. (programme P1)
1.5 min. (programme P2)
3.0 min. (programme P3)
C
1
2
3
4
5
6
P1
7
P2
8
P3
9
6D_panel
Display for the table numbers and the row numbers of each table.
Symbol for final rinse.
Symbol for washing function.
Display of values and other information for all the row numbers in the
tables.
Button for opening/closing the hood. (On machines with an automatic
hood.)
Use the P1 button to move between the table rows or to reset the values to
those last saved.
Use the P2 button to increase a value or move forwards between the
tables.
Use the P3 button to reduce a value or move backwards between the
tables.
Use the 0/1 button to enter or exit service mode.
WD-6 DUPLUS
36
Rev. 4.0 (202202)