Viewing System Status - Extron electronics MKP 2000 User Manual

5.
You can now select the tabs at the top of the screen to display additional pages that enable
you to configure and control the MKP 2000.

Viewing System Status

The
of the MKP current settings, including the IP and gateway addresses, the RS-232 port
settings, the voltage, and the connections. Changes to these settings can be made via the
Configuration web pages, SIS programming, and the MKP front panel.
Figure 29.
34 MKP 2000 • HTML Operation
Figure 28. Enter Network Password Page
In the field, enter the appropriate administrator or user password. Click
Password
The MKP checks several possibilities, in the following order, and then responds
accordingly:
If the address includes a specific file name, such as
•
, the MKP downloads that HTML page.
html
If there is a file in the MKP memory that is named
•
as the default startup page.
index.html
If neither file is found, the MKP downloads the
•
figure 29), which is the factory-installed default startup page with the file name
.
nortxe_index.html
page on the
System Status
System Status Page
10.13.156.10/file_name.
index.html
System Status
tab (see figure 29) provides an overall view
Status
.
OK
, the MKP downloads
page (see