Using The File Management Page - Extron electronics MKP 2000 User Manual

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.

Using the File Management Page

The
MKP 2000 from your computer or network. You can also upload personalized web pages
or event files to the MKP via this screen. To display the
File Management
NOTE: If you want a page you created and uploaded to be the default startup page,
Figure 36.
NOTE: The files listed in figure 36 are shown as examples only and may not be present
Connect a crossover cable from the LAN port on your computer to the MKP LAN port.
On the Windows Start menu on your computer, right click on
From the pop-up menu, select
opens.
Right click on
Local Area Connection
menu.
On the
Local Area Connection
click the button. The
Properties
Write down the existing
IP address
window. You will need these later in order to restore your computer settings after you
configure the MKP for internet use.
Select the
Use the following IP address
If your MKP has not had an IP address assigned to it and is still using its factory default
address, enter the following address in the
If an IP address has been assigned to your MKP, enter a temporary address for your
computer that is in the same subnet as the MKP. Your system administrator should
have this information.
Enter in the
255.255.0.0 Subnet Mask
the field. (Your system administrator can provide this information.)
Default Gateway
Click , and close the remaining windows.
OK
Open
Internet Explorer
If the MKP has not been assigned an IP address, enter the factory default address:
.
192.168.254.253
Press on your keyboard. The
Enter
Perform the
Firmware Upgrade
page (see figure 36) lets you upload and delete files on the
File Management
tab.
name that file "index.html".
File Management Page
on your MKP 2000.
. The
Properties Network Connections
, and select
Properties
window, select
Internet Protocol (TCP/IP)
Internet Protocol
and
subnet mask
radio button.
IP Address
field. If required, enter the gateway address in
, and enter the IP address of your MKP in the
web page is displayed.
System Status
procedure, beginning with
File Management
My Network Places
window
from the pop-up
, and
(TCP/IP) window opens.
shown on the
IP properties
field: .
192.168.254.252
Address
step 5 on page 41.
page, select the
MKP 2000 • HTML Operation
.
field.
43