Html Operation; Downloading And Startup Page - Extron electronics MKP 2000 User Manual

HTML Operation

This section describes the factory-installed HTML pages, which are always available and
cannot be erased or overwritten, including:
•
•
•
•
•
You can use a web browser, such as Microsoft Internet Explorer, to configure the MKP
through its Ethernet port, when it is connected via a LAN or WAN. The browser display of
the MKP configuration has the appearance of web pages.
NOTE: If your Ethernet connection to the matrix switcher is unstable, try turning off the

Downloading and Startup Page

Access the MKP using HTML pages as follows:
1.
2.
3.
4.
Downloading and Startup Page
Viewing System Status
Using the Configuration Pages
Using the File Management Page
Special Characters
proxy server in your web browser as follows:
1. In Microsofts Internet Explorer, select
> s.
LAN Setting
2.
Clear the
Use a proxy server...
3. Click .
Ok
Start the web browser program.
Enter the MKP IP address in the browser Address field.
NOTE: If the local system administrators have not changed the value, the factory-
specified default,
192.168.254.253
If you want the browser to display a page other than the default MKP 2000 web page
(such as a custom page that you have created and uploaded), enter a slash (/) after the
address, and the name of the web page file you want to display.
NOTES:
• The browser Address field should display the address in the following format:
xxx.xxx.xxx.xxx/{optional_file_name.html}.
• The following characters are invalid: {space} - ' [ ] { } , ; | and \ .
Press on your keyboard. The MKP checks to see if it is password protected.
Enter
If the MKP is not password protected, proceed to step 6.
•
If the MKP has a password, the network password prompt window appears (see
•
figure 28 on the next page). A
>
Tools Internet Options
check box.
, is the correct value for this field.
entry is not required.
User name
MKP 2000 • HTML Operation
>
Connections
33