YASKAWA MP2000 Series User Manual page 72

5.1 Using the 263IF-01 as a Scanner
5.1.2 Examples of EtherNet/IP Transmission Definition Settings
( 2 ) Network Parameter Tab Page
This section describes the settings on the Network Parameter tab page when performing I/O communication using the
263IF-01 as a scanner. The settings and setting values are examples for the system configuration shown in 5.1.1 System
Configuration Example on page 5-2.
( 3 ) Connection List Tab Page
This section describes the settings on the Connection List tab page when performing I/O communication using the
263IF-01 as a scanner. The settings and setting values are examples for the system configuration shown in 5.1.1 System
Configuration Example on page 5-2.
2
The following shows the details of items.
1 Network Configuration Button
This button is valid only when online. When this button is clicked, the NetWork Configuration Search window
is displayed. You can check information on devices that have currently joined the EtherNet/IP network on this
window.
Scanner/Adaptor Selection
2
Select Scanner for all three devices here because the other devices that perform I/O communication are scanners.
IP Address
3
Enter the IP address of the other device.
5-4
3 4 5 6
Enter the IP address of the local station (scanner IP address:
192.168.001.002).
Enter these settings for your device.
1
7 8 9 10 11 12 13 14 15