YASKAWA MP2000 Series User Manual page 56

Gateway IP Address
3
When communication is performed with other networks connected through a gateway (router), enter the IP
address of the gateway.
If there is no gateway or a gateway is not used, enter 0 for fields No. 1 to No. 4 of the gateway IP address.
The data input range for the gateway IP address varies according to the field.
Setting example
192.
 Do not set the same address for the IP addresses and the gateway IP address.
Device Name
4
Any desired name can be set for a local station within 16 characters.
Engineering Port
5
Enter the port number of the engineering port (communication port of the Machine Controller used for communi-
cation with the MPE720) in the range of 256 to 65535. Remember that 2222, 9998, and 10000 cannot be used.
168. 100. 200
Field No. 4: 1 to 254
Field No. 3: 0 to 255
Field No. 2: 0 to 255
Field No. 1: 0 to 255 (excluding 127)
4.2 EtherNet/IP Transmission Definition
4.2.2 Network Parameter Tab Page
4-7