YASKAWA MP2000 Series User Manual page 43

∗ 1. High-speed engineering communication is possible with the Ethernet (LP) communication port
because the engineering message size has been expanded when compared to the Ethernet com-
munication port. For this reason, selecting Ethernet(LP) is recommended.
∗ 2. The specifications for Ethernet and CP-218 are the same. No matter which option is selected, there are no
differences in the communication specifications.
The Port Setting dialog box will be displayed.
 The name of the dialog box will depend on the type of port that was selected.
3.
For IP Address (First), enter the IP address of the computer. Set the rest of the items as shown in the
following screenshot, and then click the OK button.
4.
Click the OK button in the Logical Port Setting dialog box.
The display will return to the Communication Manager window.
5.
Confirm that the type of port you selected is allocated to the logical port number you selected.
6.
Click File - Save. A confirmation dialog box will be displayed. Click the Yes button to save the commu-
nication port setting values.
These settings will be used as the communication port information whenever the Communication Manager is
started.
3.3 Setting the Communication Platform and Communication Manager
3.3.2 Setting the Communication Platform/Communication Manager
• If Ethernet(LP) was selected for Port Kind: 9999
• If a port other than Ethernet(LP) was selected for Port
Kind: 10000
3-13