YASKAWA MP2000 Series User Manual page 118

Machine controller. ethernet/ip communication module
Hide thumbs Also See for MP2000 Series:
Table of Contents

Advertisement

Appendix A Details of Status Codes
A.2 Extended Status Code Table
Extended
Status
Code (Hex)
0206
0207
0301
0302
0303
0304
0311
0312
0315
0316
0317
0318
0319
031A
031B
031C
031D
031E
031F
320 to 7FF
A-4
Text
ROUTER_EXT_ERR_MESSAGE_TOO_
LARGE
ROUTER_EXT_ERR_UNCONN_ACK_
WITHOUT_REPLY
ROUTER_EXT_ERR_NO_BUFFER_
MEMORY_AVAILABLE
ROUTER_EXT_ERR_BANDWIDTH_NOT_
AVAILABLE
ROUTER_EXT_ERR_TAG_FILTERS_NOT_
AVAILABLE
ROUTER_EXT_ERR_REAL_TIME_DATA_
NOT_CONFIG
ROUTER_EXT_ERR_PORT_NOT_
AVAILABLE
ROUTER_EXT_ERR_LINK_ADDR_NOT_
AVAILABLE
ROUTER_EXT_ERR_INVALID_SEGMENT_
TYPE_VALUE
ROUTER_EXT_ERR_PATH_
CONNECTION_MISMATCH
ROUTER_EXT_ERR_INVALID_
NETWORK_SEGMENT
ROUTER_EXT_ERR_INVALID_LINK_
ADDRESS
ROUTER_EXT_ERR_SECOND_
RESOURCES_NOT_AVAILABLE
ROUTER_EXT_ERR_CONNECTION_
ALREADY_ESTABLISHED
ROUTER_EXT_ERR_DIRECT_CONN_
ALREADY_ESTABLISHED
ROUTER_EXT_ERR_MISC
ROUTER_EXT_ERR_REDUNDANT_
CONNECTION_MISMATCH
ROUTER_EXT_ERR_NO_MORE_
CONSUMER_RESOURCES
ROUTER_EXT_ERR_NO_TARGET_PATH_
RESOURCES
ROUTER_EXT_ERR_VENDOR_SPECIFIC
Details
The message for the unconnected message service is too large.
Unconnected type ACK for which a response is not given.
No available buffer memory.
No available network bandwidth for data transmission.
(Error that occurs on the master side, or error returned by the
slave side.)
No usable tag filter is available.
The system is not configured to send data in real time.
The port specified in the port segment is not available.
(Error returned by the slave side.)
The link address specified in the port segment is not available.
(Error returned by the slave side.)
The segment type or segment value specified in the path is
invalid.
(Error returned by the slave side.)
When the connection is closed, the path and the connection do
not agree with each other.
(Error returned by the slave side.)
The segment does not exist, or the encode value of the network
segment is invalid.
The link address to the local station is invalid.
The secondary resource is not available.
The connection has already been established.
The direct connection has already been established.
Others
(Error that occurs on the master side.)
Mismatch in redundant connection
No remaining receive resources that can be used by the trans-
mission module exist.
The connection resource for the target path does not exist.
Vendor specific error

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

263if-01Japmc-cm2304-e

Table of Contents