YASKAWA MP2000 Series User Manual page 116

Appendix A Details of Status Codes
A.1 General Status Code Table
Appendix A Details of Status Codes
In the Status Detail window (refer to 4.2.8 Status Detail Window on page 4-17), General Status code and Extended Sta-
tus code are displayed if the status code is "4003H." The following table explains these codes in detail.
A.1 General Status Code Table
Status
Code (Hex)
0000
0001
0002
0003
0004
0005
0007
0008
0009
000C
0010
0011
0013
0014
0015
0025
0026
A-2
Text
–
ROUTER_ERROR_FAILURE
ROUTER_ERROR_NO_RESOURCE
ROUTER_ERROR_INVALID_PARAMETER_
VALUE
ROUTER_ERROR_INVALID_SEG_TYPE
ROUTER_ERROR_INVALID_DESTINATION
ROUTER_ERROR_CONN_LOST
ROUTER_ERROR_BAD_SERVICE
ROUTER_ERROR_BAD_ATTR_DATA
ROUTER_ERROR_OBJECT_STATE_
CONFLICT
ROUTER_ERROR_DEV_IN_WRONG_
STATE
ROUTER_ERROR_REPLY_DATA_TOO_
LARGE
ROUTER_ERROR_NOT_ENOUGH_DATA
ROUTER_ERROR_ATTR_NOT_
SUPPORTED
ROUTER_ERROR_TOO_MUCH_DATA
ROUTER_ERROR_BAD_KEY_IN_PATH
ROUTER_ERROR_BAD_PATH_SIZE
Details/Description
Service has been completed successfully.
Details are given by Extended Status code.
 Refer to A.2 Extended Status Code Table on page A-3.
The Connection Manager resource necessary for processing the
service request cannot be used.
The connection number specified by Get_Connection_Data
service is invalid.
If the specified connection is not found, the Search_Connec-
tion_Data service will also return this code.
The segment type in the path is invalid.
The word offset (0 base) to the error position in the path is
taken as the Extended Status. The offset starts from the word
immediately after the path size field.
This error code is not returned if the error occurs during syn-
tax analysis of the connection path.
The path destination is invalid.
The word offset (0 base) to the error position in the path is
taken as the Extended Status. The offset starts from the word
immediately after the path size field.
This error code is not returned if the error occurs during syn-
tax analysis of the connection path.
Connection was lost.
When the Get/Set service is created through the connection,
the Get/Set service uses this code.
The Connection Manager does not support the requested ser-
vice.
Data segment error
The Extended Status gives an index that indicates the posi-
tion where the error occurred in the data segment.
The index is "1" when the configuration revision number is
present in the data segment. If the error occurs in the Get/Set
service, the Extended Status will indicate the failed attribute
number.
With the current state of the object, the requested service can-
not be performed.
As an option, the first word of the Extended Status can
include the current object state.
With the current state of the device, the requested service can-
not be performed.
As an option, the first word of the Extended Status can
include the current device state.
The response data volume is too large.
The Get service uses this code to indicate that the amount of
the request data is too great to be set in the response buffer.
Not enough data has been received.
The Connection Manager does not support the attribute speci-
fied in the FIND service.
Too much data has been received.
At least one of the following in the key segment does not agree
with the device: Vendor ID, product code, product type, and
major or minor revision information.
This code is used if a key segment is included in the path.
The path size is invalid.