Oracle Exalytics In-Memory Machine Owner's Manual page 78

Note:
Before copying the file, ensure that you back up the existing file as
exalytics_configure_network.sh_V1 first.
Execute the Oracle Exalytics network configuration script to configure the
5.
network interfaces.
#cd /opt/exalytics/bin
#./exalytics_configure_network.sh
Complete the following steps to configure ASR:
6.
– For an OL5 based Exalytics Image, the steps are:
Go to the
a.
/opt/exalytics/asr
commands to add executive permissions on the two Perl files:
chmod +x bda_mon_hw_asr.pl
chmod +x setup_asr_ilom.pl
Add the following line to the
b.
emh1:345:respawn:/opt/exalytics/asr/bda_mon_hw_asr.pl -server
At the command line, execute the
c.
start the
bda_mon server
Note:
You can also download the patch
patch 21565893, unzip the patch file
x86-64.zip –d /tmp/
file.
readme.txt
– For an OL6 based Exalytics Image, the steps are:
Go to the
a.
/opt/exalytics/etc/init.d/
monitor file
#cp /opt/exalytics/etc/init.d/bda-monitor /etc/init.d/
Note:
If the
bda-monitor
init.d/
p21565893_20000_Linux-x86-64.zip
to the directory.
Run the following command to add the
b.
#chkconfig –add bda-monitor
directory, and run the following
/etc/inittab
init q
.
p21565893_20000_Linux-x86-64.zip
#unzip p21565893_20000_Linux-
, and follow the instructions in the
directory, and copy the
to directory by running the command:
/etc/init.d/
file is not found in the
directory, the file can be located in the patch
Chapter 9
Before You Begin
file:
command to initialize and
/tmp/
bda-
/opt/exalytics/etc/
, which can then be copied
file:
bda-monitor
9-4