Oracle Exalytics In-Memory Machine Owner's Manual page 48

Table 4-5 (Cont.) exalytics_configure_network.sh Properties
Question/Parameter
Use xx.xxx.xxx.xx for
eth0 gateway (y/n) [y]
Configure eth1 Interface?
(y/n) [n]
Disable eth1
Do you want to configure
1G network (y/n) [y]
Configure bonding on eth2
eth3 eth4 eth5? (y/n)
[n]: n
Configure eth2 Interface?
(y/n) [n]: y
Enter eth2 IP address
Use xx.x.x.xx for eth2 ip
address (y/n) [y]: y
Enter eth2 netmask
address
Use xxx.xxx.xxx.xxx for
eth2 netmask (y/n) [y]: y
Enter eth2 gateway
address
Use xx.x.x.x for eth2
gateway (y/n) [y]: y
Configure eth3 Interface?
(y/n) [n]: n
Disable eth3
Configure eth4 Interface?
(y/n) [n]: n
Disable eth4
Configure eth5 Interface?
(y/n) [n]: n
Disable eth5
Do you want to configure
hostname (y/n) [n]: y
Enter hostname
Use xxxxx for host_name
(y/n) [y]: y
Enter domainname:mydomain Enter a domain name. For example, mydomain.
Use xxxxx in for
domainname (y/n) [y]: y
Do you want to configure
timezone (y/n) [y]: y
Configuring the Network for Oracle Exalytics In-Memory Machine
Description
Verify the eth0 gateway address you specified, and enter y.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Enter an eth2 IP address. For example, 10.10.10.11.
Verify the eth2 IP address you specified, and enter y.
Enter a netmask for the eth2 interface. For example,
255.255.255.254.
Verify the eth2 netmask address you specified and then enter
y.
Enter an eth2 gateway address. For example, 10.1.1.1.
Verify the eth2 gateway address you specified, and enter y.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Enter a hostname for the machine. For example, myhost.
Verify the hostname you specified, and enter y.
Verify the domain name you specified, and enter y.
Depending on your configuration option, enter y or n.
Chapter 4
4-12