Connecting Exalytics In-Memory Machine To Your Network - Oracle Exalytics In-Memory Machine Owner's Manual

To determine the eth0 IP address:
Connect to the Integrated Lights Out Manager (ILOM) of that machine through
1.
Secure Shell (SSH) using the default IP address
To access the host serial console, run the following command:
2.
-> start /HOST/console
Log in to the ETH0 interface of the operating system on the Exalytics host with the
3.
following user name and the default password:
•
•
To find the IP address attached to the Oracle Exalytics In-Memory Machine, enter
4.
the following command:
# ifconfig -a
If the serial console is not set up on the system, you can use the remote RKVM
connection to login to the host to check the IP address. For more information to login
to the host, see
4.6 Connecting Exalytics In-Memory Machine to Your
Network
To connect the Oracle Exalytics In-Memory Machine to your data center's network,
complete the following steps:
Attach one end of the network cable to a Gb Ethernet port, such as
1.
Figure
Connect the other end of the cable to a network connector or switch, if the network
2.
is already set up in your building; or to a hub, for a client/server network.
Ensure that you have a laptop with functional USB and network ports.
3.
Ensure that you have a Category 5E patch cable of maximum length 25 feet and a
4.
serial cable of maximum length 15 feet.
Connect the network port of your laptop into an unused input port in the network
5.
connector or switch. Do not connect to any management ports on the network
connector or switch.
If you have not booted the operating system on your laptop, start the operating
6.
system now.
•
User name: root
Password: welcome1
Launching a Remote KVM
4-3).
If you are using the Windows operating system on your laptop, do the
following:
Go to Control Panel > Network Connections. Select your wired network
a.
adapter in the list of network connections, right-click and select
Properties. The network properties screen is displayed.
Click the General tab, and select Internet Protocol (TCP/IP). Click
b.
Properties. The Internet Protocol (TCP/IP) Properties screen is displayed.
Select the Use the following IP address: option, and enter a static IP
c.
address for your laptop. Although a default gateway is not necessary,

Connecting Exalytics In-Memory Machine to Your Network

192.168.1.200
Session.
Chapter 4
.
(see
NET 2
4-6