Host Name - Oracle Exalytics In-Memory Machine Owner's Manual

If you do not opt for a bonded interface, the script verifies whether you want to
configure each interface separately. You are prompted to enter an IP address,
netmask, and gateway address for each individual interface configured.
When you configure 10 GbE interfaces using the
script, the following files are updated:
/etc/sysconfig/network-scripts/ifcfg-eth*
/etc/sysconfig/network-scripts/ifcfg-bond1
/etc/modprobe.conf
Note:
The script keeps a copy of the interface files in the
directory and creates a flat backup for the files that may be modified.
4.7.1.3 1 GbE Interfaces
The
exalytics_configure_network.sh
1 GbE interfaces. If you opt for bonding, the script configures the bonded interfaces
using
bond2
address, netmask, and gateway address.
If you do not opt for a bonded interface, the script verifies whether you want to
configure each interface separately. You are prompted to enter an IP address,
netmask, and gateway address for each individual interface configured.
When you configure 1 GbE interfaces using the
the following files are updated:
/etc/sysconfig/network-scripts/ifcfg-eth*
/etc/sysconfig/network-scripts/ifcfg-bond2
/etc/modprobe.conf
Note:
The script keeps a copy of the interface files in the
directory and creates a flat backup for the files that may be modified.

4.7.1.4 Host Name

The
exalytics_configure_network.sh
domain name for your Oracle Exalytics In-Memory Machine. You cannot configure a
domain name without configuring a host name.
The configured host name maps to an IP address in the following sequence:
• The Last IP configured in this session.
• If no IP configured, it will take the IP from first active interface from:
...,
• If no IP is found, then no IP is configured in the
on all 1 GbE interfaces. For
.
eth5
Configuring the Network for Oracle Exalytics In-Memory Machine
exalytics_configure_network.sh
/tmp/exalytics.save/
script verifies whether bonding is required on the
interface, the script requires an IP
bond2
exalytics_configure_network.sh
/tmp/exalytics.save/
script optionally configures a host name and a
/etc/hosts
Chapter 4
script,
, ,
bond1 bond2
file.
4-9