State Of The Oracle Exalytics In-Memory Machine Before Running The Script; Running The Exalytics_Configure_Network.sh Script; Database Machine; Exalytics_Configure_Network.sh Properties - Oracle Exalytics In-Memory Machine Owner's Manual

4.7.2 State of the Oracle Exalytics In-Memory Machine Before
Running the Script
Before running the
Memory Machine is not configured with the following:
• 10 GbE and 1 GbE network interfaces
• Optional InfiniBand network interfaces
• Host name, domain name, and time zone
• Time server and domain name servers

4.7.3 Running the exalytics_configure_network.sh Script

Run the
as described in
Table 4-5
Question/Parameter
Do you want to configure
InfiniBand for Exadata
connection? [y/n) [n]
Enter bond0 IP address
Use xx.xxx.xx.xx for
bond0 ip address (y/n)
[y]
Enter bond0 netmask
address
Use xx.xxx.xxx.xx for
bond0 netmask (y/n) [y]
Do you want to configure
10G network(y/n) [n]
Configure bonding on eth0
eth1? (y/n) [n]
Configure eth0 Interface?
(y/n) [n]
Enter eth0 IP address
Use xx.xxx.xx.xx for eth0
ip address (y/n) [y]
Enter etho0 netmask
address
Use xx.xxx.xxx.xx for
eth0 netmask (y/n) [y]
Enter eth0 gateway
address
Configuring the Network for Oracle Exalytics In-Memory Machine
exalytics_configure_network.sh
exalytics_configure_network.sh
Table 4-5.

exalytics_configure_network.sh Properties

Description
Enter y if you want to configure InfiniBand for connecting
Oracle Exalytics In-Memory Machine to Oracle Exadata

Database Machine.

Enter a bond0 IP address. For example, 192.168.21.12.
Verify the bond0 IP address you specified, and enter y.
Enter a bond0 netmask address. For example, 255.255.255.0.
Verify the bond0 netmask address you specified, and enter y.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Depending on your configuration option, enter y or n.
Enter an eth0 IP address. For example, 10.10.10.10.
Verify the eth0 IP address you specified, and enter y.
Enter a netmask for the eth0 interface. For example,
255.255.248.0.
Verify the eth0 netmask you specified, and enter y.
Enter the eth0 gateway address. For example, 10.20.30.40.
script, your Oracle Exalytics In-
script, and choose your configuration option,
Chapter 4
4-11