Table of Contents
Advertisement
3.4.
Start Pipetting
There is no power On/Off button on the LABNET Excel electronic
pipettors. Once users insert the fully-charged battery, the pipettor will be
switched on. It will perform a calibration routine and switch on the LCD
display as in Figure 8. Press any keypad button or the
enter the function mode selection. The LABNET Excel electronic pipettor
will be automatically powered off if it's not in use for more than 10
minutes.
Select the desired function mode and settings (refer to the following
chapters : 6 ~ 10 ) before pipetting. After the initial set-up, attach the
correct-sized tips to the cone(s) of the pipette before operation.
Product No.
SE10-1
SE20-1
SE200-1
SE1200-1
SE10-8
SE20-8
SE200-8
SE1200-8
Volume
Channels
Range (µl)
1
0.5 -10
1
2 -20
1
10 -200
1
100 -1,200
8
0.5 -10
8
2-20
8
10-200
8
100 -1,200
8
button to
PLUNGER
Correct
Pipette Tip
Size
10µl
10µl
200µl
1000 µl
10µl
10µl
200 µl
1000 µl
Advertisement
Table of Contents
