Md (Multiple Dispensing) Mode - Labnet Excel E10-1 Operation Manual

8. MD (Multiple Dispensing) Mode

In MD mode, the LABNET Excel electronic pipettor performs repetitive
dispensing of a selected volume.
mode, users "MUST" select Reverse Pipetting in the System (SYS)
settings. Reverse Pipetting is used in Multiple Dispensing (MD) mode to
provide better accuracy and precision with repeated dispensing. Reverse
Pipetting means that an extra volume of liquid will be left in the tip at the
end of a multiple dispensing cycle, and the display will show
remind the user to dispense this residual volume before repeating the
multiple dispense cycle.
1. Press «EXIT» to enter the mode selection.
2. Press «Up/Down» to make the
3. Press «SET» to confirm the selection. The
then appear.
4. Use «Up/Down» to select the desired pipetting count.
5. Press «SET» to confirm the selection of count. The default
pipetting volume will start flashing.
6. Use «Up/Down» to select the desired pipetting volume.
7. Press «SET» to confirm the pipetting volume. The pipetting
volume will show the total aspirating volume.
After the settings are completed, first press the
the sample according to the pipetting volume. Then press the
button repeatedly to dispense the samples according to the pipetting counts.
For the last count, you will hear two beeps to indicate that the next dispense
is the last and the display will show
button and dispense the extra remaining amount of liquid. After
PLUNGER
When using Multiple Dispensing (MD)
symbol flash.
button to aspirate
PLUNGER
to remind the user to press the
21
to
symbol will
PLUNGER