completing the Multiple Dispensing cycle, pressing the
again will aspirate liquid into the tip and repeat the set MD cycle.
9. MIX Mode
After the settings are completed (see instructions below), Mixing is
performed automatically by pressing the
1. Press
«EXIT» to enter mode selection.
2. Press
«Up/Down» repeatedly until the
flashing.
3. Press
«SET» to confirm the selection. The
then appear.
4. Use
«Up/Down» to select the desired mixing count.
5. Press
«SET» to confirm the selection. The default pipetting volume
will start flashing.
6. Use
«Up/Down» to select the desired mixing volume.
7. Press
«SET» to confirm the selection. The total mixing volume and
counts will be displayed.
Press the
PLUNGER
completion of mixing, pressing the
mixing process until the user changes the function mode.
10. SE (Sequential Aspirating/Dispensing) Mode
SE mode includes SA (Sequential Aspirating) mode and SD (Sequential
Dispensing) mode.
PLUNGER
button to start the mixing function. After the
PLUNGER
22
button
PLUNGER
button once.
symbol starts
symbol will
button will re-activate the