Charging The Battery - Labnet Excel E10-1 Operation Manual

Note: After a charged battery is inserted, the LABNET electronic pipette
will automatically carry out a calibration routine.
3.3.

Charging the Battery

There are two ways to charge the battery: (1) Attach the included AC-DC
Power Adapter to the pipettor (2) Use the optional battery charging kit.
Included AC-DC Power Adapter
Insert the battery into the battery compartment. Insert the DC-in plug of the
power adaptor into the DC-in jack (see Figure 3). Connect the power plug
of the power adaptor with the external power source.
plug before inserting the battery will inactivate the charging process.
indication bar inside battery symbol
process. When the battery is fully charged, the blinking will stop and the
LABNET electronic pipette will beep once to remind the user.
Optional Charging Kit
Connect the power plug of the charging unit to the proper external power
source. The indication light will turn green. Insert the battery (see Figure 4).
Once the battery is correctly inserted and charging, the indicator light will
turn red. When the battery capacity is full, the indicator light will turn green
again.
Connecting the power
will blink during the charging
6
The