Reverse Pipetting - Labnet Excel E10-1 Operation Manual

3. If is selected, pressing
move to the "PROG" setting. If
will confirm the selection and move to the "Reverse Pipetting" setting.
Note: It is important to withdraw the tip quickly from the dispensed sample
vessel after dispensing if Blow-out is selected, because the piston will
automatically retract a short distance. By holding the
during dispensing, the piston will travel the distance to blow out, and
remain there until the
6.5.

Reverse Pipetting

The automatic reverse pipetting, in different pipetting modes, is to reserve
the final drop of sample. The LABNET Excel electronic pipettor will not
perform reverse pipetting in MIX or SE modes.
1. The "Reverse Pipetting" symbol
2. Press «Up/Down» to choose the preference (
Off).
3. Press «SET» to confirm the selection and move to the "PROG"
setting.
Note: If Reverse Pipetting is selected, users have to press the
button one more time after pipetting to dispense the remaining liquid
during the pipetting.
dispense the remaining liquid.
«SET» will confirm the selection and
is selected, pressing
button is released.
PLUNGER
should now be flashing.
will appear on the LCD to remind users to
17
«SET»
button
PLUNGER
: On, :
PLUNGER