Labnet Excel E10-1 Operation Manual page 24

2. Press and hold «SET» for 2 seconds to enter AUTO + MIX mode
selection. Both AUTO and MIX symbols will appear. The pipetting
volume will appear and start flashing.
3. Use «Up/Down» to select the desired pipetting volume.
4. Press «SET» to confirm selected volume and enter MIX mode
setting. The
5. Press «Up/Down» to select the desired mixing cycle counts.
6. Press «SET» to confirm selected mixing cycle counts. The mixing
volume will start flashing.
7. Press «Up/Down» to select the desired mixing volume.
8. Press «SET» to confirm selected mixing volume.
Press the button to aspirate the sample. Press the
PLUNGER
button again to dispense the sample and the LCD will display the mixing
cycle counts and volume. Press the
sample. In the end of mixing, sample will remain in the tip and LCD will
display Press the
.
blow-out function.
symbol will start flashing.
PLUNGER
to dispense the remaining sample with
PLUNGER
20
PLUNGER
to mix and dispense the