Related Manuals for Labnet D1301
Summary of Contents for Labnet D1301
- Page 1 Accublock Digital Dry Bath User Manual D1301 D1301-230V D1302 D1302-230V D1304 D1304-230V Copyright 2017...
- Page 2 Intended use: Labnet International’s single and dual Dry Bath Incubators provide comprehensive designs for a wide variety of life science research applications. Excellent temperature control figures can deliver accurate and reliable experimental results from one experiment to another. About This Manual This manual is designed to assist you in the optimal usage of your AccuBlock Digital Dry Bath.
-
Page 3: Table Of Contents
Table of Contents 1.0 Safety Precautions ................1 1.1 Operation Safety Precautions ............1 2.0 General Specifications ..............1 2.0 Electrical requirements:..............1 3.0 Getting Started................2 3.1 Unpacking ..................2 3.2 Initial Operation ................2 4.0 Controls ...................2 4.1 Keypad Function ................2 5.0 Operation..................3 6.0 Calibration ..................4 7.0 USB Interface ..................5 8.0 Troubleshooting Guide/Service ............5 8.1 Service .....................5... - Page 4 If the digital dry bath is used in a manner not specified by the manufacturer, the protection provided by the centrifuge may be impaired.
-
Page 5: Safety Precautions
Not to exceed 2,000 meters Control PI Microprocessor controller USB unidirectional Dimensions (W x D x H) D1301/D1302 8.3 x 11.4 x 4.7 in./21 x29 x 12cm D1304 8.3 x 15.3 x4.7 in./21 x 39 x 12 cm Weight D1301/D1302 7.0 lbs./3.2 kg... -
Page 6: Getting Started
3.0 Getting Started 3.1 Unpacking Upon unpacking the Dry Bath, inspect for damages. Shipping damage is the responsibility of the carrier. Open the AccuBlock Dry Bath package and confirm that all items are included: • Dry Bath unit • Block Lifter •... -
Page 7: Operation
5.0 Operation Place Labnet Dry Bath Incubator on a sturdy and level surface in a safe, dry place, away from laboratory traffic. Ensure that the AC power switch is OFF, then plug the three-pronged power cord into a grounded three-prong AC outlet of the appropriate voltage (115V or 220V as indicated on the rating sticker near the AC cord on the back of the unit). -
Page 8: Calibration
6.0 Calibration Calibration allows the unit temperature display to be adjusted or matched to the temperature of a single sample or to a calibrated thermometer making an independent temperature measure of the block. The Digital Dry Baths are calibrated at the factory at 37, 60, 90, 120, 140°C using a standard 20 x 13mm heating block. -
Page 9: Usb Interface
7.0 USB Interface The Digital Dry Baths have a USB unidirectional data port. A software and cable are available which allow a user to use a desk top or lap top computer to record and/or print a record or the temperature profile produced by the dry bath. -
Page 10: Service
8.1 Service Digital Dry Bath Should you have a question about the operation of the or if service is required, contact Corning at 800-492-1110. Do not send in a unit for service without first calling to obtain a repair authorization number. Should the unit require return to Corning for service, it should be properly packed to avoid damage. - Page 11 AccuBlock Digital Dry Bath | 7...
-
Page 12: Limited Warranty
Limited Warranty Corning Incorporated (Corning) warrants that this product will be free from defects in material and workmanship for a period of two (2) years from date of purchase. This warranty is valid only if the product is used for its intended purpose and within the guidelines specified in the supplied instruction manual. - Page 13 Corning Incorporated 271 County Route 64 Big Flats, NY 14814 www.labnetinternational.com labnetinfo@corning.com...
Need help?
Do you have a question about the D1301 and is the answer not in the manual?
Questions and answers