Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Labnet 35
Summary of Contents for Labnet 35
- Page 1 Operating Instructions Labnet Benchtop Rocker Model 35/35D...
-
Page 3: Table Of Contents
Table of Contents Introduction Warranty Specifications Unpacking and Installation Operation Adjusting Platform Tilt Safety Precautions Care and Maintenance Where to Call... - Page 4 Copyright January 2000, Labnet International Inc. All rights reserved. Reproduction without prior written permission is prohibited. Information contained herein subject to change without notice.
-
Page 5: Introduction
This provides the rocker with a stable base for vibration free operation. The maximum load the rocking platform can carry is 4.6kg. The Model 35/35D Benchtop Rocker is available with either a single or double platform. In the double platform version, the second plat- form attaches to the first platform by means of metal rods. -
Page 6: Warranty
Labnet International guarantees that the Model 35/35D Benchtop Rocker you have received meets its published specification. The Model 35/35D Benchtop Rocker is guaranteed to be free of defects in materials and workmanship for a period of one year from the date of purchase. -
Page 7: Specifications
Warranty sec- tion of this manual. The Model 35/35D Benchtop Rocker should be located on a level, stable surface near a grounded electrical outlet. Allow sufficient clear- ance on all sides of the unit, at least 3 inches, for proper ventilation. -
Page 8: Operation
Do not overtighten the wingnuts. Plug the power cord into a grounded wall socket. The Model 35/ 35D Benchtop Rocker is now ready for use. Operating the Model 35/35D Benchtop Rocker The Model 35/35D Rocker may be operated in either timed or con- tinuous mode. -
Page 9: Safety Precautions
7. Remove the locking rod. 8. Replace access cover Safety Precautions The following precautions should be taken when operating or work- ing near the Model 35/35D Benchtop Rocker: Never operate the rocker without a platform securely attached. Always wear shatterproof eye protection. -
Page 10: Care And Maintenance
Care and Maintenance After each use, the Model 35/35D Benchtop Rocker should be wiped down with a soft, damp cloth. Do not immerse the rocker in water or pour liquids over the unit as electrical shock may occur. The rod bearing should be lubricated every 3 to 6 months with a few drops of oil (Three-in-One, Handy Oil or similar). - Page 11 Notes...
Need help?
Do you have a question about the 35 and is the answer not in the manual?
Questions and answers