Setting Prog (Programs) - Labnet Excel E10-1 Operation Manual

6.6.

Setting PROG (Programs)

The memory program includes 9 different storage locations (PROG 01 ~
09). Your favorite operating modes with user-selected settings can be stored
to these locations for future recalls. Before setting the programs, you must
have programmed operating mode (e.g. AUTO, MD mode, etc).
Store Operating Mode to Storage Locations
1. Complete the setup of function mode (e.g. AUTO, MD, MIX mode).
2. Press and hold
3. Press «Up/Down» to select PROG number from 01 ~ 09.
4. Press «SET » to confirm the location selection and save the
functions.
Recall Stored Programs from the Storage Location
1. Press «EXIT» to enter the function mode selection. Then press
«Up/Down» until the
2. Press «SET» repeatedly to confirm the selection of all 6 function
settings until the
3. Press «Up/Down» to select the PROG number.
4. Press «SET» to confirm the selection.
5. Press the
PLUNGER
pipettor in the selected program.
Note: During the recall process, the changes of other settings will not be
stored.
«SET» for 3 seconds to enter PROG mode.
symbol starts flashing.
symbol starts flashing.
button to operate the LABNET Excel electronic
18