Sys (System) Mode; Aspirating Speed - Labnet Excel E10-1 Operation Manual

9. SYS (System) Mode

SYS mode is used to set up the function settings before pipetting. Once
users select and store these settings, they will no longer need to set up the
settings before every pipetting. There are 6 function settings (Aspirating
Speed, Dispensing Speed, Audible Signals, Blow-out, Reverse Pipetting
and Program Recall) in SYS mode.
Note :
1. These 6 function settings are sequential procedures. To store these
settings in memory, users have to complete the whole setting procedure
and press «SET» when the LCD displays
2. Users can use the
previous function settings.
6.1.

Aspirating Speed

There are 5 speeds available for both aspirating and dispensing:
1. Press «EXIT» to enter the function mode selection. Then press
«Up/Down» to select the
2. Press «SET» to confirm the selection of
aspirating speed symbol
3. Press «Up/Down» to change the aspirating speed (
Fastest).
4. Press «SET» to confirm the speed selection and move to the
"Dispensing Speed" function setting.
«Up/Down» button to move back and forth to the
symbol (flashing).
will start flashing.
15
.
mode and the
: Slowest, :