Remote Control Rc1000 - Inficon Modul1000 Operating Manual

3.3.3

Remote control RC1000

The wireless remote control RC1000 allows the operation of the Modul1000 from a
distance of maximum 100 m. The remote control can serve for controlling the func-
tions START, STOP/VENT (STOP/Vent), ZERO (Background). It shows the meas-
ured leak rate on the display as bar graph, as digits, or as diagram (refer to Technical
Manual of RC1000).
The measured values can be stored in the internal memory of the RC1000 for a
recorded period of maximum 24 hours. Then the data can easily be transferred to a
USB stick.
An internal trigger can be set to provide a warning if the limit leak rates are exceeded.
An optical warning is shown on the display and an acoustic warning signal is
sounded on the integrated loudspeaker or the connected headphones.
The RC1000 remote control is housed in a robust housing to enable ergonomic work-
ing. Magnets on the underside of the unit enable it to be attached to horizontal or ver-
tical metal surfaces.
With the remote control RC1000, the leak test device Modul1000 can also be control-
led via a 28 m long cable.
Fig. 3-7 RC1000 wireless remote control
3-5
Description of equipment