Inficon GAS-Mate Operating Manual
Combustible gas leak detector
Hide thumbs
Also See for GAS-Mate:
- Quick start manual (20 pages) ,
- Operation manual (61 pages) ,
- Operating manual (13 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Inficon GAS-Mate
Summary of Contents for Inficon GAS-Mate
- Page 1 O P E R A T I N G M A N U A L GAS-Mate ® Combustible Gas Leak Detector...
- Page 2 Community and does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which it was made. Equipment Description ....GAS-Mate Combustible Gas Leak Detector ®...
- Page 3 GAS-Mate® and INFICON® are trademarks of INFICON Inc. The GAS-Mate is Intrinsically Safe for Class I, Division 1, Groups A-D, T4 and rated II 3G Ex nA nL IIC T4 X as per Listing Number E112145 by MET Laboratories, Inc.
- Page 4 Introduction GAS-Mate is an intrinsically safe instrument designed to detect leaks of a variety of combustible gases and flammable refrigerants. It can be used for many leak testing applications including, but not limited to: Combustion appliances Gas-fired furnaces ...
-
Page 5: Specifications
GAS-Mate will detect leaks as described below but may not indicate when a hazardous atmosphere is present due to its Auto Zeroing function. Lack of a reading by GAS-Mate should not be taken as an indication that the atmosphere is totally safe. - Page 6 Install Two “D” Cell Alkaline Batteries W A R N I N G To prevent ignition of a hazardous atmosphere, batteries must only be changed in an area known to be non-hazardous (i.e., free of combustible gas). CA UT ION ®...
- Page 7 NOTE: GAS-Mate defaults to maximum sensitivity on startup. It is recommended to use this setting for most applications. 4. Carry GAS-Mate into the area of the suspected leak. An alarm at this time indicates a build-up of combustible gas in the general area.
-
Page 8: How To Change The Sensor
How to Change the Sensor The sensor comes installed in the tip of the GAS-Mate probe. You only need to insert/remove the sensor when it is time to replace it. NOTE: If all leak indicators flash and a steady alarm occurs, the sensor is bad or not installed properly. -
Page 9: Troubleshooting
W A R N I N G Substitution of components may impair intrinsic safety. Except for the batteries and the sensor, the internal parts of the GAS-Mate Combustible Gas Leak Detector are not user serviceable. If you experience a problem with your GAS-Mate, follow the steps in the troubleshooting guide below to determine how to remedy your problem. -
Page 10: Replacement Parts And Accessories
Merchantability or of Fitness for a particular purpose or otherwise. All such other warranties are expressly disclaimed. INFICON shall have no liability in excess of the price paid to INFICON for the instrument plus return transportation charges prepaid. INFICON shall have no liability for any incidental or consequential damages. - Page 12 TWO TECHNOLOGY PLACE EAST SYRACUSE, NY 13057-9714 USA Phone: +1.800.344.3304 Fax: +315.434.2520 E-Mail: service.tools@inficon.com inficonservicetools.com 074-529-P1C...