Table of Contents
Advertisement
8.3.8
SM-Applications Plus Module View
If Apps/Apps Plus/Apps Lite is selected in the Slot# Module list box, the remainder of the view should be blank. The hierarchy
tree automatically updates to show that an Applications Plus module is populated in the specific slot, see Figure 73.
Figure 73:
8.3.9
SM-Ethernet
If Ethernet is selected in the Slot# Module list box, the remainder of the view should have configuration parameters for the
Ethernet module communications. The hierarchy tree automatically updates to show that an Ethernet module is populated in
the specific slot, see Figure 75.
Figure 74:
IP Address
This is a 32-bit identification number for each node on an Internet Protocol network. These addresses are represented as four
8-bit numbers (0 to 255), with periods between them. Each node on the Ethernet network must have a unique IP address. For
EZMotion User/Programming Guide
Revision A8
Slot# View (SM-Applications Plus Module)
Slot# View (SM-Ethernet Module)
www.controltechniques.com
69
Advertisement
Table of Contents
