Table of Contents
Advertisement
4
PowerTools Pro Software
4.1
Introduction
PowerTools Pro is the software used to configure hardware type, setup parameters, I/O functionality, motion profiles, user
programs, and networks for the SM-EZMotion module. PowerTools Pro software operates on a PC running Windows® 98,
2000, 2003, 2008, XP (32-bit) with SP2 and Vista (32-bit) and can also be used as a diagnostic tool and troubleshooting
assistance.
4.2
Installing PowerTools Pro
4.2.1
From the SM-EZMotion CD
PowerTools Pro can be installed directly from the SM-EZMotion CD that ships with every SM-EZMotion module. To install
PowerTools Pro, insert the SM-EZMotion CD into the CD-ROM drive of your PC. The SM-EZMotion CD will auto-launch on
your PC (if not, use Windows Explorer to find the Launch.exe file on the CD drive, double click). From the SM-EZMotion CD
Main Menu, click on the PowerTools Pro Software button. Figure 6 shows the SM-EZMotion software screen.
Figure 6:
Once the button is clicked the installation will begin. Follow the installation instructions to complete the software installation.
4.2.2
From the Web
PowerTools Pro can be downloaded from the Control Techniques website at the following address: www.emersonct.com.
Figure 7:
EZMotion User/Programming Guide
Revision A8
SM-EZMotion Software Screen
Control Techniques Americas' Website
www.controltechniques.com
11
Advertisement
Table of Contents
