Section 4: Modbus Rtu Module - Emerson Bettis XTE3000 Installation, Operation And Maintenance Manual

Section 4: Modbus RTU Module

October 2022
Section 4: Modbus RTU Module
The module consists in a single PCB that is installed inside the actuator housing. It is connected to the
XTE3000 base card via strip connector.
The internal wiring connects the RS485 data lines to the actuator terminal board.
Figure 1
Figure 2
4
Installation, Operation and Maintenance Manual
Top Side
Bottom Side
VCIOM-15081-EN Rev. 7
Modbus RTU Module