Watch Window - Emerson EZMotion User Manual

Menu 7
7.01
7.02
7.03
7.04
7.05
7.06
7.07
7.08
7.09
7.10
7.11
7.12
7.13
7.14
7.15
7.16
7.17
7.18
7.19 20.21
7.20
Figure 180:
For more details on the Analog Output of the drive, refer to the Unidrive SP User Guide or Unidrive SP Advanced User Guide.
14.3 PowerTools Pro

14.3.1 Watch Window

PowerTools Pro contains a diagnostic utility called the Watch Window. The Watch Window can be used while PowerTools Pro
is online with EZMotion. The Watch Window allows the user to monitor the status of all of their desired system parameters in
one location. An example of the Watch Window is found in Figure 181.
Figure 181:
To setup the Watch Window, select Tools > Watch Window from the PowerTools Pro menu bar. If not online with the module,
the Watch Window will be a unavailable on the menu. Upon selecting Watch Window, the Select Drive Parameters window will
open.
The Select Drive Parameters window, as seen in Figure 182, allows the user to specify which parameters are to be viewed in
the Watch Window. To select a parameter for the Watch Window, simply click once on the parameter and it will be added to the
Watch Window. The parameters already in the Watch Window will be highlighted in the Select Drive Parameters window.
EZMotion User/Programming Guide
Revision A8
EZMotion Program 0
Var.Var0 = 12.34
Do While TRUE
Menu.20.21 = Var.Var0
Loop
Analog Output Example
Watch Window Example
www.controltechniques.com
Menu 20
20.15
20.16
20.17
20.18
20.19
20.20
12.34
20.21
20.22
Anaolg Output Value
20.23
20.24
20.25
20.26
20.27
20.28
20.29
20.30
20.31
20.32
20.33
20.34
12.34
241