Tools - Emerson EZMotion User Manual

Figure 17:
En, MDS, Epsilon Motor DDF Section:
Use the standard Motor DDF file
Select this check box to use the standard motor ddf file.
Standard Motor DDF Name
The name of the standard motor ddf file is entered in the text box, default is stdmotor.ddf.
User Motor DDF Name
When a custom motor is created this is the name of the motor ddf file where the information is stored, default is motor.ddf.
Ep Motor DDF Section:
Standard Motor DDF Name
The name of the standard motor ddf file for Epsilon EP drives.
Unidrive SP Motor DDF Section:
Use the SP Standard Motor DDF file
Select this check box to use the standard motor ddf file with the Unidrive SP/Digitax ST.
SP Standard Motor DDF Name
The name of the standard motor ddf file is entered in the text box, default is spstdmotor.ddf.
SP User Motor DDF Name
When a custom motor is created this is the name of the motor ddf file where the information is stored, default is spmotor.ddf.
4.4.5

Tools

Figure 18 shows the Tools menu as selected from the PowerTools Pro Menu Bar.
Figure 18:
Watch Window
Selecting Watch Window will launch a diagnostics tool that allows the user to view the current value of multiple EZMotion
parameters while online with the drive. For more information on the Watch Window, refer to Diagnostics on page 237 in this user
guide.
Drive Menu
The Drive Menu Watch Window allows the user to read or write a single Unidrive SP/Digitax ST Menu Parameter from within
PowerTools Pro.
Reading a Menu Parameter
To read a Menu Parameter, enter the Menu Parameter number to be read in the Menu.Parameter text box. The Menu Parameter is
entered using the MM.PP format (where MM is the Menu number and PP is the parameter number). Once the Menu parameter is
entered, then click on the Read button. The value read from the Unidrive SP/Digitax ST will be displayed in the Parameter Data box.
Writing to a Menu Parameter
To write to a Menu Parameter, enter the Menu Parameter number to be read in the Menu.Parameter text box. The Menu Parameter
18
PowerTools Preferences - Motor DDF Tab
Tools Menu
www.controltechniques.com
EZMotion User/Programming Guide
Revision: A8