Configuring Multiple J-Links / J-Traces - Segger J-Link User Manual

90
5.6.2

Configuring multiple J-Links / J-Traces

8. Start JLink.exe to view your hardware version. Your J-Link needs to be V5.0 or
up to continue. For J-Trace the Version does not matter.
9. Type usbaddr = 1 to set the J-Link / J-Trace #1.
10. Unplug J-Link / J-Trace and then plug it back in.
11. The system will recognize and automatically install a new J-Link / J-Trace.
12. you can verify the driver installation by consulting the Windows device manager.
If the driver is installed and your J-Link / J-Trace is connected to your computer,
the device manager should list the J-Link USB drivers as a node below "Universal
Serial Bus controllers" as shown in the following screenshot:
J-Link / J-Trace (UM08001)
CHAPTER 5
© 2004-2009 SEGGER Microcontroller GmbH & Co. KG
Working with J-Link and J-Trace