Segger J-Link User Manual page 50

48
Right-click on the driver to open a context menu which contains the command Prop-
erties. If you select this command, a J-Link driver Properties dialog box is opened
and should report: This device is working properly.
If you experience problems, refer to the chapter Support and FAQs on page 187 for
help. You can select the Driver tab for detailed information about driver provider,
version, date and digital signer.
J-Link / J-Trace (UM08001)
CHAPTER 3
© 2004-2009 SEGGER Microcontroller GmbH & Co. KG
Setup