J-Link Gdb Server - Segger J-Link User Manual

4.2.8

J-Link GDB Server

GDB Server is a remote server for the GNU Debugger GDB. GDB and GDB Server
communicate via a TCP/IP connection, using the standard GDB remote serial proto-
col. The GDB Server translates the GDB monitor commands into J-Link commands.
The GNU Project Debugger (GDB) is a freely available debugger, distributed under
the terms of the GPL. It connects to an emulator via a TCP/IP connection. It can con-
nect to every emulator for which a GDB Server software is available. The latest Unix
version of the GDB is freely available from the GNU committee under:
http://www.gnu.org/software/gdb/download/
J-Link GDB Server is distributed as "free for evaluation and non commercial use". The
software can be used free of charge for educational and nonprofit purposes without
additional license. Without additional license, only 32 KBytes may be downloaded. To
download bigger programs or to use the software for other, especially commercial
purposes, a license is required. With such a license, the download size is not limited.
Free 30 days limited license are available upon request. For further information go to
our website or contact us directly.
J-Link / J-Trace (UM08001) © 2004-2009 SEGGER Microcontroller GmbH & Co. KG
65