J-Link Gdb Server; J-Link Rdi - Segger J-Link User Manual

the J-Link status window. When the debug session is running you can modify the set-
tings regarding J-Link ARM FlashDL and FlashBPs, in the Settings tab and save
them in the settings file.
6.4.3

J-Link GDB Server

The configuration for the J-Link GDB Server is done by the .gdbinit file. The follow-
ing commands has to be added to the .gdbinit file to enable J-Link ARM FlashDL and
FlashBPs:
monitor flash device <DeviceID>
monitor flash download = 1
monitor flash breakpoints = 1
For more information about these three commands please refer to the J-Link GDB
Server User Guide chapter Supported remote commands.
6.4.4

J-Link RDI

The configuration for J-Link RDI is done via the J-Link RDI configuration dialog. For
more information about the J-Link RDI configuration dialog please refer to the J-Link
RDI User Guide, chapter Configuration dialog. If you use the J-Link ARM FlashDL
and/or FlashBP feature with RDI disable them in the J-Link status window or leave
the default settings.
J-Link / J-Trace (UM08001) © 2004-2009 SEGGER Microcontroller GmbH & Co. KG
127