Installing The J-Link Arm Software And Documentation Pack; Setup Procedure - Segger J-Link User Manual

44
3.1 Installing the J-Link ARM software and documen-
tation pack
J-Link is shipped with a bundle of applications, corresponding manuals and some
sample projects and the kernel mode J-Link USB driver. Some of the applications
require an additional license, free trial licenses are available upon request from
www.segger.com.
Refer to chapter J-Link and J-Trace related software on page 55 for an overview
about the J-Link software and documentation pack.
3.1.1

Setup procedure

To install the J-Link ARM software and documentation pack, follow this procedure:
Note: We recommend to check if a newer version of the J-Link software and doc-
umentation pack is available for download before starting the installation. Check
therefore the J-Link related download section of our website:
http://www.segger.com/download_jlink.html
1. Before you plug your J-Link / J-Trace into your computer's USB port, extract the
setup tool Setup_JLinkARM_V<VersionNumber>.zip.
install the software and documentation pack that also includes the certified J-
Link USB driver. Start the setup by double clicking Setup_JLinkARM_V<Version-
Number>.exe. The license Agreement dialog box will be opened. Accept the
terms with the Yes button.
2. The Welcome dialog box is opened. Click Next > to open the Choose Destina-
tion Location dialog box.
J-Link / J-Trace (UM08001)
CHAPTER 3
© 2004-2009 SEGGER Microcontroller GmbH & Co. KG
Setup
The setup wizard will