Intermec Data Collection PC User Manual page 368

5020 Data Collection PC User's Manual
Example 2
In this example, rename the Scanner tab to Input Device.
To rename the Scanner tab
1. Follow the instructions earlier in this section to connect the 5020 to your
2. Edit the 5020 registry.
3. Open the Scanner branch of the registry as shown below.
4. Edit the DisplayName field and change the name from "Scanner" to "Input
5. Save the changes and exit the registry editor.
6. To see the changes, restart the Configuration application on the 5020. The Scanner
D-8
Co d e 39
Nugg
development PC.
Device." The registry appears as shown next.
configuration tab in the Data Collection menu shows the new display name. You
also see the new name in the Configuration menu option of remote Unit
Management.