Restoring A Corrupted Operating System Image - Intermec Data Collection PC User Manual

13. If you have an RF 5020 or a 5020 with an Ethernet card, the following message
14. Press
15. The message in Step 13 appears. Press

Restoring a Corrupted Operating System Image

If you think that you have a corrupted operating system image, contact your Intermec
service representative to confirm that you need to restore your operating system image
and to receive a new operating system image.
The following procedure should only be used to restore a corrupted operating system
image or if the normal upgrade procedure does not work.
Caution
Before you upgrade, back up any files and applications. Only the network settings
and scanner selection are preserved on an upgrade.
Conseil
Avant d'effectuer la mise à niveau, faites une sauvegarde de vos fichiers et
applications. Seuls les paramètres réseau et le choix du scanner sont conservés lors
d'une mise à niveau.
To restore a corrupted operating system image
1. Connect the 5020 to AC power using either a D5020 dock or L5020 adapter and
2. Connect the 5020 to the host PC using either a D5020 dock or L5020 adapter. For
3. Create a directory on the host PC for the operating system image
nuggetf
may appear:
DHCP was unable to obtain an IP address. You can
reinsert your card later or statically assign an
&
address.
Do not press to clear the message. Wait for the message to disappear and the
&
upgrade to continue.
to answer Yes to the "The new OS installed successfully. Reboot the
downloaded OS?" prompt.
The green LED flashes until the reboot is finished, a tone sounds, and the 5020
desktop appears.
your 5020 for your network.
make sure the main battery pack is fully charged.
help, see the documentation that shipped with your dock or adapter.
(NK_FLASH.BIN) and download program (OSDOWNLOADSERVER.EXE)
code39
Troubleshooting
&
to clear the message and then configure
9
9-21