Intermec Data Collection PC User Manual page 385

booting the 5020, 9-17
cold boot
importing registry file, C-10, D-9
procedure, 9-18
did not hear beep sequence before entering application, 9-8
to set parameters, 9-7
turning on the 5020, 1-11
warm boot, 9-17
Bound property value, D-10
box, shipping, list of contents, 1-6
Break property value, C-10
bridge battery
charge status, 2-25
charging, 2-24
cold temperatures, using in, 9-16
described, 2-18, 2-24
extending life of, 2-18
low battery charge, 9-15
power, managing, 9-15
status, viewing, 4-15
buffer, data, icon blinks, 9-6
buffer, receiving
Data Buffered In and Out icon, 2-7
Data Buffered In icon, 2-7
Data Buffered Out icon, 2-7
No Data icon, 2-7
C
CABARC program, 6-8
cabinet (CAB) file, 6-8
deleting, 6-10
error message, 9-13
installing, 6-10
problems installing, 5-28
cables, serial communications, A-7
capitalizing characters
Keypad Caps Lock command, using, 8-47
keypad, using, 2-12
Caps Lock
icon, described, 2-5, 2-12
key, 2-15
Keypad Caps Lock command, 8-47
card, using
compact flash, 2-30
PC, 2-27
CCD scanners
configuring for tethered scanner port, 8-68
list of supported, 2-33
CD-ROMs
CABARC program, 6-8
contents, 1-16
CE Services, See Windows CE
CEMGRC.EXE, 6-17
Center Modifier key
icon, described, 2-6
locking, 2-14
overriding when locked, 2-14
using, 2-13
CETLSTUB.DLL, 6-17
change configuration
configuration commands, using, 8-6
reader commands, using, 7-7
characters
accent marks, typing with, 2-10
capitalizing, 2-12
delay, setting, 4-12
Keypad Caps Lock command, 8-47
repeat rate, setting, 4-12
setting the maximum number for the user interface, D-14
typing, 2-12
charging batteries
bridge battery, 2-24
cold temperatures, guidelines, 9-16
main battery pack, 2-23
check box, enabling or disabling, 3-11
ChoiceFmt property value
described, D-11
example, changing, D-6
Clear reader command, 7-5
clicker, keypad, 8-48
CmdOID property value, D-11
CmdString property value, D-12
Codabar command, 8-17
Code 11 command, 8-19
Code 128 command, 8-30
Code 16K command, 8-20
Code 2 of 5 command
described, 8-21
disabled with Interleaved 2 of 5, 8-44
Code 39
ASCII characters, table of, B-3 to B-5
configuration command, 8-23
creating bar code labels, 8-3
Code 49 command, 8-27
Code 93 command, 8-29
code page, virtual wedge, 8-97
cold booting the 5020
described, 9-18
installing an application, 6-11
cold temperatures, guidelines for using in, 2-18, 2-24, 9-16
COM port, locating, 2-18
commands
configurable by bar code, 3-19
configuration, See also configuration commands
configuration commands, using, 8-3
reader, See also reader commands
reader commands, using, 7-3
I
Index
I-5